Technical data

Installing Site Manager on an HP 9000 Workstation
117342-B Rev. 00
12-5
5.
Log out of the user account.
Repeat steps 1 through 5 for each user account that needs to run Site Manager.
Verifying Site Manager Installation
To verify the Site Manager installation and environment:
1.
Log in to a user account that you set up for Site Manager.
2.
Start the window environment, for example, CDE.
3.
Verify the Site Manager installation by entering:
wfchkinst
If the installation was successful, the workstation displays the message:
Installation is complete and correct!
4.
Verify the Site Manager environment by entering:
wfchkenv
If the environment was correctly configured, the workstation displays the
message:
Your environment seems to have been set up correctly.
Repeat steps 1 through 4 for each user account that has Site Manager installed.
Note:
If your environment variables are incorrect, you receive an error
message to reset the variables.