Specifications

Chapter 3: Getting Started | 9
3. Getting Started
3
This chapter will walk you through the steps to start managing your switch. This chapter will
cover how to get started in a network with a DHCP server (most common) as well as if you do
not have a DHCP server.
For a Network with a DHCP Server
1. Connect the Smart Switch to a DHCP network.
2. Power on the Smart Switch by plugging in power cord.
3. Install the SmartControlCenter program on your computer
4. Start the SmartControlCenter utility. (Chapter 4 has detailed instructions on the
SmartControlCenter utility)
5. Click Discover on the SmartControlCenter utility to find your switch. You should see
something similar to Figure 3-1.
6. Select your switch by clicking on it. Then click on Web Browser Access, as highlighted in
Figure 3-2.
Figure 3-1: SmartControlCenter Utility > Discover