Technical data

Modifying and Saving Router Configurations
117347-A Rev. A 3-7
Figure 3-2. Compact Confirmation Window
5.
Click on OK.
You return to the Router Files Manager window (refer to Figure
3-1).
6. Choose File > Exit.
You return to the main Site Manager window.
Making a Copy of the Existing Configuration File
If you are configuring a new router, make a copy of startup.cfg and modify the
copy. If you are configuring an existing router, make a copy of the config file.
To create a copy of a configuration file as a backup:
1. Connect to the router.
Refer to Chapter 1 for instructions.
2. In the main Site Manager window, choose Tools > Router Files Manager.
The Router Files Manager window opens (refer to Figure
3-1).
3. Choose the router volume where the configuration file resides.
4. Choose the configuration file from the list of files.
5. Choose Commands > Copy.
The Copy window opens (Figure
3-3).
Caution: On AN and ANH routers, compacting memory can take up to 12
minutes. Do not reset the router during this time because you will corrupt the
flash memory. Consequently, you will need to replace the flash memory to
boot the router.