Technical data

Using the Configuration Manager
117347-A Rev. A 2-25
2.
Read the message and click on OK.
The Configure Console V.34 Modem window opens (Figure
2-18).
Figure 2-18. Configure Console V.34 Modem Window
3.
Set the Modem Factory Defaults parameter to Disable.
Click on Help for parameter descriptions.
4. In the Modem Config String parameter, enter a standard AT command
string.
Refer to Configuring Dial Services for a summary of AT modem initialization
commands for the ARN.
5. Click on OK.
Caution: Entering an invalid command string could disable the modem. Site
Manager can verify AT command string changes only when in dynamic mode.