Technical data

Using the Configuration Manager

117347-A Rev. A 2-15

Figure 2-12. Module List Window for an ARN Base Module

Select the base module conﬁguration from the Base Modules/Data

Collection Modules list.

If the ARN base module contains an installed RMON data collection module

(DCM), select Ethernet/DCM.

3. Click on OK.

You return to the Conﬁguration Manager window, which now displays the

interfaces for the base module selected.

4. If the ARN contains no expansion or adapter modules, conﬁgure the base

module interfaces next.

5. If the ARN contains only an expansion module, go to step 11.

6. If the ARN contains a WAN adapter module installed in a front panel

slot, click on Adapter Module in the Conﬁguration Manager window.

The Module List window opens (Figure

2-13).