Technical data

Configuring and Managing Routers with Site Manager
2-12 117347-A Rev. A
The Configuration Manager opens and displays the logical image of the
router’s connectors (Figure
2-9).
If you are configuring an ARN, go to “Opening a New Configuration File for
an ARN Router” on page
2-14.
Figure 2-9. Configuration Manager Window for a New Configuration File
3.
Specify the router’s hardware.
In local mode, the Configuration Manager requires that you specify the
hardware configuration whenever you create a new configuration file. You can
add hardware to empty slots and change the hardware in occupied slots. The
procedure for both is the same.
a. Click on the box labeled Empty Slot to specify hardware for a slot.
The Module List window opens, which lists the modules and their
corresponding model numbers (Figure
2-10).