Technical data

Using the Configuration Manager
117347-A Rev. A 2-3
Entering Parameter Values Using the Values Button
To configure a router, you need to enter values for parameters in the Configuration
Manager windows. Most configuration parameters have a default value that is
displayed in the parameter field. To change the default value, you can use the
Values button and choose a value from a list of valid options. The Values button is
in the upper right corner of the window (Figure
2-1). This is the recommended
method for selecting parameter values.
Figure 2-1. Edit SNMP Global Parameters Window
To select a parameter value using the Values button:
1. Click on the field across from the parameter.
2. Click on Values.
The Configuration Manager opens a Values Selection window that lists all
valid options for that parameter.
Figure
2-2 shows an example for the Enable parameter in the Edit SNMP
Global Parameters window.
Note: Some parameters do not list options when you click on Values, for
example, an IP address parameter or a password parameter. You must type
such values.