Technical data

Getting Started with Site Manager
117347-A Rev. A 1-25
Starting Site Manager Tools
To start a Site Manager tool, choose an option from the Tools menu in the main
Site Manager window (refer to Figure
1-3). Table 1-5 lists and describes Site
Manager tools.
Each of these tools, except router redundancy, is described in a subsequent chapter
of this guide. For information about starting Site Manager tools from the UNIX
command line, refer to Appendix A.
For information about router redundancy, refer to Configuring Interface and
Router Redundancy.
Table 1-5. Site Manager Tools
Site Manager Tool What It Does
Configuration Manager Configures the router.
Statistics Manager Collects information about the router, protocols, the MIB, and
router performance.
Trap Monitor Collects real-time information about the operating status of
the router.
Router Files Manager Transfers, copies, deletes, and manages files.
Report Generator Creates reports about router configuration files.
Events Manager Displays the current event log, which includes detailed
messages about the operating status of the router.
Image Builder Customizes router software image files.
Router Redundancy Enables you to configure a router as a backup router and
include it in a
router redundancy group . If a primary router
from the redundancy group fails, a secondary router
activates.
If you want to configure a router with the redundancy feature,
use this option instead of the Configuration Manager. Refer
to
Configuring Interface and Router Redundancy for all
configuration instructions.