Technical data

Reallocating Memory Partitions for a Processor Module

117347-A Rev. A E-3

Repartitioning Global and Local Memory

To repartition global and local memory:

1. Connect to the router.

Refer to Chapter 1 for instructions.

2. In the main Site Manager window, choose Administration > Kernel

Conﬁguration.

The Kernel Conﬁguration window opens (Figure

E-1).

Figure E-1. Kernel Conﬁguration Window

If the router you are conﬁguring is not an AN, ANH, AFN, or ASN, or if the

router does not contain an ACE-32 or a FRE-2 processor module, a window

opens with the following message:

No valid modules were found

Caution: Change memory partitioning only at the recommendation of, or

under the direction of, the Bay Networks Technical Solutions Center. Under

normal router and network operating conditions, there is no need to modify the

default memory partitions established for a processor module. You reallocate

processor memory partitions in rare instances, and only for the purpose of

network troubleshooting.