Technical data

Configuring the syslog Facility
117347-A Rev. A D-7
5.
Click on Add.
The Syslog Filter Config window opens (Figure
D-5).
Figure D-5. Syslog Filter Config Window
6.
Type the Filter Entity Name, then click on OK.
You return to the Syslog Host Filter List window (refer to Figure
D-4).
The IP address of the host, the filter number, and the filter index appear in the
list.
7. Define the filter by entering values for the filter parameters.
Refer to the parameter descriptions beginning on page B-26 or click on Help.
8. Click on Apply.
9. To add more filters, repeat steps 5 through 8.
10. Click on Done.