Technical data

Checking SNMP SET Errors
117347-A Rev. A C-3
Accessing the SNMP SET Error Log
Your Site Manager workstation can log SNMP SET errors that the router receives.
Figure
C-1 shows the logged version of the SET lockout error message.
Figure C-1. Logged Version of SNMP SET Error Message
By logging the errors, you can examine them and discover their cause. You can
examine the default or designated SNMP SET error log file on your Site Manager
workstation.
The following sections explain how to specify a destination for the SNMP SET
errors on a UNIX workstation or a PC.
Error Messages on a UNIX Workstation
UNIX Site Manager workstations use the standard UNIX syslog facility and
syslog.conf file to specify destinations for SNMP SET error messages. Refer to
the instructions provided in the UNIX man pages for information on syslog and
syslog.conf.
To determine the current destination for the error messages, check the facility
level, user.err, in the /etc/syslog.conf file. The path next to each user.err entry
indicates a destination for SNMP SET error messages.
Modify the syslog.conf file if you want to change the destination for SNMP SET
error messages.
Jun 21 16:21:22 corpmgr syslog:
SNMP set error!
Machine is currently locked by manager <198.43.21.156>.
Object wfSyncLineNumber.
Message
When received
(timestamp)
Message received
by locked-out
workstation named
Received by workstation
software entity named
Locked manager's IP address
SET attempt failed on
MAN0005A