Manualshelf

Technical data

ManualsBrandsBay Networks ManualsComputer equipmentEvent Manager
341342343344345346347348349350
Configuring and Managing Routers with Site Manager
C-2 117347-A Rev. A
Receiving an SNMP SET Error
When you receive an SNMP SET error message, click on OK in the error message
box and see if another SET error message appears. If no other SET error message
appears immediately, try the SET operation again.
If several SET error messages appear in succession while you are in dynamic
mode, wait for the router’s SNMP lockout condition to clear, then follow these
steps:
1. Delete the circuit you are attempting to configure.
2. Add the circuit again.
3. Repeat the rest of your configuration.
If the previous steps fail:
1. Exit the Configuration Manager without saving your changes.
2. Reboot the router with the current (last saved) configuration file.
3. Re-create your entire configuration.