Technical data

Configuring and Managing Routers with Site Manager
B-24 117347-A Rev. A
Parameter: Host Log Facility
Default: LOCAL7
Options: LOCAL0 to LOCAL7
Function: Specifies the facility type that syslog appends to router event messages as
part of the priority code. The syslogd daemon on the remote host uses this
information to determine which system generated the message that syslog
forwarded.
Instructions: Specify the facility type you want to use. You must also specify the
facility type in the syslog.conf file on the remote host so that the syslogd
daemon knows where to direct event messages from this facility.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.5
Parameter: Host Time Seq Enable
Default: Disable
Options: Enable
| Disable
Function: Forwards to the remote host router event messages in the order that they
occur.
Instructions: Enable this feature only if it is essential that the remote host receive router
event messages in the order that they occur.
When this feature is enabled, the syslog facility polls the router, filters the
event messages, orders them based on the time they occurred, and then
forwards them to the remote hosts.
When this feature is disabled, the syslog facility polls the router, filters the
event messages, and then forwards the messages to the remote hosts.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.6