Technical data

Site Manager Parameters
117347-A Rev. A B-23
Syslog Host List Parameters
This section describes the parameters in the Syslog Host List window.
Parameter: Messaging Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the forwarding of router events to this remote host.
Instructions: If you want syslog to forward router events to this host, accept the default.
Otherwise, choose Disable.
You can also stop the forwarding of router events to the host by deleting
the host. If you delete a remote host and later decide you want to forward
router events to that host, you must add the remote host again.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.2
Parameter: Host UDP Port
Default: 514
Options: 514 to 530
Function: Identifies the UDP port of the remote host.
Instructions: Type the port number to which you want syslog to send UDP packets.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.4