Technical data

Site Manager Parameters
117347-A Rev. A B-19
Parameter: Timer
Default: 0
Options: Any integer
Function: Specifies the number of minutes that will pass before the ping occurs
again.
Instructions: Enter an integer, or enter 0 if you want to initiate the ping request only
once.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.13.1.1.11
Parameter: Trace Route
Default: PING_NOTRACE
Options: PING_NOTRACE
| PING_TRACE
Function: Lets you turn on the Trace Routes feature to show the intermediate IP
addresses (hops) the ICMP echo packet went through to reach the
destination address.
Instructions: Select PING_TRACE to turn on the Trace Routes feature; otherwise,
accept the default, PING_NOTRACE.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.13.1.1.8