Technical data

Configuring and Managing Routers with Site Manager
B-16 117347-A Rev. A
Parameter: Minutes from UTC
Default: None
Options: 0 to 59
Function: Specifies the number of minutes that the local time zone differs from the
Universal Time Code (UTC).
Instructions: Enter an integer that reflects the difference in minutes between the local
time zone and the UTC.
MIB Object ID: None
Trap Parameters
This section describes the parameters in the Trap Port and Trap Types window.
Parameter: Trap Port
Default: 162
Options: 1 to 9999
Function: Specifies the number of the port on the Site Manager workstation to
which the SNMP agent sends traps.
Instructions: Accept the default, 162, or change the UDP port number to use a different
port for the Site Manager workstation. Do not use a port used by another
application.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.1.1.5
Parameter: Trap Types
Default: Generic
Options: All
| Generic | Specific | None
Function: Specifies the type of trap messages that are sent to the SNMP manager.
Instructions: Select the types of traps that you want to receive. Refer to Chapter 7 for
an explanation of each trap type.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.1.1.6