Technical data

Site Manager Parameters
117347-A Rev. A B-15
Parameter: Boot Configuration File
Default: None
Options: Any valid configuration file, along with the volume that contains the
configuration file
Function: Specifies the configuration file that the router uses to boot.
Instructions: Enter the volume and configuration file name in the format
<volume>:<configuration file>, for example, 2:config.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.14.2.1.6
Parameter: Local Time/UTC Offset
Default: None
Options: LOCAL
| PLUS | MINUS
Function: Specifies whether the local time zone is ahead of or behind the Universal
Time Code (UTC).
Instructions: Enter PLUS if your time zone is ahead of the Universal Time Code (UTC)
or MINUS if it is behind the Universal Time Code (UTC). Enter the value
in uppercase letters. Do not enter LOCAL unless the UTC offset of the
router’s system clock is set to 0. Refer to Chapter 1 for instructions on
setting the router’s time.
After you enter PLUS or MINUS, the Hours from UTC and Minutes from
UTC parameters become active.
MIB Object ID: None
Parameter: Hours from UTC
Default: None
Options: 0 to 11
Function: Specifies the number of hours that the local time zone differs from the
Universal Time Code (UTC).
Instructions: Enter an integer that reflects the difference in hours between the local
time zone and the UTC.
MIB Object ID: None