Technical data

Site Manager Parameters
117347-A Rev. A B-5
Console Port Parameters
This section describes the parameters in the Console Lists window.
Parameter: Enable
Default: Enable (first port)
Disable (other ports)
Options: Enable
| Disable
Function: Enables or disables the serial port. The first port on a router is enabled by
default. The other ports on routers with multiple serial ports are disabled
by default.
Instructions: Select the status of the serial port.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.2
Parameter: Port Type
Default: TI
Options: TI
Function: Configures the port for the Technician Interface.
Instructions: Accept the default value.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.7
Parameter: Baud Rate
Default: 9600
Options: 9600
| 4800 | 2400 | 1200 | 600 | 300
Function: Specifies the rate of data transfer between the console and the router.
Instructions: Set according to your console requirements.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.8