Technical data

117347-A Rev. A B-1

Appendix B

Site Manager Parameters

You can modify many conﬁguration parameters to set up Site Manager operation,

for example, the router connections parameters, system information parameters,

and boot parameters. This appendix contains the parameters that you can modify.

When you conﬁgure parameters in Site Manager windows, you are modifying

attributes in the Bay Networks MIB.

For each parameter, the descriptions include information about default settings,

valid parameter options, the parameter function, instructions for setting the

parameter, and the MIB object ID.

The Technician Interface lets you modify parameters by issuing

set and commit

commands that specify the MIB object ID. This process is equivalent to

modifying parameters using Site Manager.

For more information about using the Technician Interface to access the MIB,

refer to Using Technician Interface Software.

Caution: The Technician Interface does not verify that the value you enter for

a parameter is valid. Entering an invalid value can corrupt your conﬁguration.