Technical data

Using the Ping Option
117347-A Rev. A 11-23
2.
Click on Add.
The Source Ping Parameters window opens (Figure
11-13).
Figure 11-13. Source Ping Parameters Window
3.
In the Source Address field, type the IP address of the first device you
want to ping.
4. Click on OK.
You return to the Source Route Entries window. The IP address you just
entered appears in the list.
5. To enter additional source route addresses, repeat steps 2 through 4.
You can enter as many as eight source route addresses. Be sure to enter the
source route addresses in the order that you want the packet to traverse them
(from source to destination).
6. Click on Apply.
7. Click on Done.
You return to the Ping at Intervals window.