Technical data

Using the Ping Option
117347-A Rev. A 11-21
4.
Click on Add.
The IP Ping Parameters window opens (Figure
11-11).
Figure 11-11. IP Ping Parameters Window
5.
Type the IP address that you want to ping, then click on OK.
You return to the Ping at Intervals window.
6. Select the IP address for which you want to configure the ping request.
7. Specify values for the parameters in the Ping at Intervals window.
Refer to the parameter descriptions beginning on page B-17 or click on Help.
8. Click on Apply.
9. If you are working in dynamic mode, click on Ping Start.
The router pings the IP address at the interval you specified.
Site Manager stores the results of the ping requests in the ping MIB tables.
10. Repeat steps 4 through 9 to configure ping requests for additional IP
addresses.
To stop trying an address, select the address in the Ping at Intervals window
and click on Ping Stop.