Technical data

Configuring and Managing Routers with Site Manager
8-40 117347-A Rev. A
By default, the MIB II counters are enabled. To measure packet count statistics
accurately, you should not disable the counters; doing so would result in
inaccurate aggregate statistics. However, if you choose to disable the counters,
you can do so by following these steps:
1. In the Configuration Manager window, choose Platform > MIB II
Counters.
The MIB II Counters Enable/Disable window opens (Figure
8-27).
Figure 8-27. MIB II Counters Enable/Disable Window
2.
Select Disable for the MIB II Counters Enable parameter.
Note that disabling the counters disables them on all circuits and slots.
Likewise, enabling the counters enables them on all circuits and slots.
3. Click on OK to save the change.
You return to the Configuration Manager window.
For information about MIB standards, see the following references:
Structure and Identification of Management Information for TCP/IP-based
Internets (SMI; RFC 1155).
Information Processing Systems - Open Systems Interconnection Specification of
Abstract Syntax Notation One (ISO 8824).