Technical data

Monitoring Statistics

117347-A Rev. A 8-17

Click on OK to save the ﬁlter in memory, or click on Refresh to

implement the ﬁlter immediately.

• If you click on OK, the Display Filters window closes. There is no

immediate change to the statistics window. However, the next time you

refresh the statistics window, it displays only statistics speciﬁed by the

ﬁlter.

• If you click on Refresh, the Statistics Manager immediately refreshes the

statistics window and displays only the statistics speciﬁed by the ﬁlter.

7. Click on OK to exit the Display Filters window.

Display Filter Example

To display only the statistics for a circuit with an IP address of 192.32.180.43,

conﬁgure the display ﬁlter as shown in Figure

8-12.

Figure 8-12. Sample Display Filters Window

When you click on Refresh in the Display Filters window, the Statistics Manager

displays only the IP address 192.32.180.43 in column 2 of the active statistics

window.

Figure

8-13 shows the result of applying the display ﬁlter.