Technical data

Monitoring Statistics
117347-A Rev. A 8-13
Zeroing Circuit Mode Statistics
You can reset all counters in a circuit mode statistics window to 0 using the Zero
All Counters option. You can also reset the counters in a selected row to 0 using
the Zero Current Row Counters option.
When you reset a counter to 0, the Statistics Manager stores the value of the
counter at that moment and uses this value as a reference point. When the counter
display resumes, the Statistics Manager displays the difference between the
counter’s current value and the last known reference value.
Zeroing a counter affects only the values displayed by the Statistics Manager and
has no effect on the actual value of counter objects in the router’s MIB. If you
close the Statistics Manager, then restart it, you will see the actual value of the
counter in the MIB, not the value displayed after resetting the counter.
The next sections explain how to zero the counters in a circuit mode window.
Zeroing All Counters in a Window
To clear all counters, choose Options > Zero All Counters.
Figure
8-9 shows a typical response to the Zero All Counters option.
Figure 8-9. Zeroing All Counters in a Window