Technical data

Monitoring Trap and Event Messages
117347-A Rev. A 7-13
Figure 7-9. Traps Exceptions Lists Window
5.
Click on Apply.
6. Repeat steps 2 through 5 for each trap exception you want to configure.
7. Click on Done.
You return to the Configuration Manager.
8. Choose File > Save to save the configuration file.
Refer to Chapter 3 for instructions.
You have now configured the SNMP agent for a router. The agent will now
send the trap messages you specified to the Site Manager workstation.
9. Go to “Using the Trap Monitor” on page 7-15 to view trap messages
using the Trap Monitor.
If you are running multiple network management applications, go to “C
hanging
the Trap Port for Multiple Network Management Applications” on page 7-14.