Technical data

Monitoring Trap and Event Messages
117347-A Rev. A 7-11
Specifying Trap Message Exceptions
You can configure the router’s SNMP agent to send specific trap messages all the
time or not at all. You select these types of exceptions by their unique entity and
event code.
To specify trap message exceptions:
1. In the Configuration Manager window, choose Protocols > IP > SNMP >
Trap Configuration > Exceptions.
The Traps Exceptions Lists window opens (Figure
7-7).
Figure 7-7. Traps Exceptions Lists Window
2.
Click on Add.
The Add Trap window opens (Figure
7-8).