Technical data

Configuring and Managing Routers with Site Manager
7-4 117347-A Rev. A
Identifying the Site Manager Workstation as an SNMP Manager
To configure the router’s SNMP agent, you must first configure the router to
recognize your Site Manager workstation as a valid SNMP manager.
To set up the workstation as an SNMP manager:
1. Connect to the router.
Refer to Chapter 1 for instructions.
2. In the Site Manager window, choose Tools > Configuration Manager >
Local File, Remote File, or Dynamic.
The Configuration Manager window opens (Figure
7-1).
Figure 7-1. Configuration Manager Window
3.
Choose Protocols > IP > SNMP > Communities.
The SNMP Community List window opens (Figure
7-2). The default
community, public, is selected.