Technical data

Customizing Router Software Images
117347-A Rev. A 6-15
If you exit the Image Builder without saving your changes, you are asked if
the changes should be discarded before you exit.
7. Transfer the new image to the router using the Router Files Manager.
The Router Files Manager lets you transfer files between the Site Manager
workstation and any Bay Networks router using TFTP.
If space is available, you should keep the old software image on the router
until you succeed in booting it with the new image. If space is not available,
delete the old image and then transfer the new one. Refer to Chapter 5 for
instructions.
8. Use a named boot and boot the router with the new image.
Refer to Chapter 4 for instructions on performing a named boot.
If the router has the available memory, test the new image file before you
overwrite the existing image.
Note: Be sure that all the files in the image are from the same router software
version.