Technical data

Managing Router Files
117347-A Rev. A 5-17
Setting Up File Transfers to Multiple Routers
You can transfer one or more files from the Site Manager workstation to several
routers simultaneously. For example, you might want to send a new boot image to
three different routers at the same time.
Before you can use the Put File(s) option to transfer files to multiple routers, you
need to set up the destination routers.
To set up multiple routers to receive file transfers:
1. In the Router Files Manager window, choose Options > Router
Connection.
The Router Connection Options window opens.
2. Complete the Router Connection Options window for each router to
which you want to transfer the files, then click on OK.
Refer to Chapter 1 for instructions on completing this window.
3. Choose Options > Multiple Router Setup.
The Multiple Router Setup window opens (Figure
5-10).
Figure 5-10. Multiple Router Setup Window