Technical data

Configuring and Managing Routers with Site Manager
5-4 117347-A Rev. A
Default Router File Names
Table 5-2 lists the default file names in the Router Files Manager window.
Table 5-2. Default Router File Names
File Name Description Notes
ace.out Bootable image for the FN,
LN, ALN, AFN with diskette,
and CN
The router automatically references this binary file for
booting instructions, unless you specify another bootable
image. You cannot read or change this file. It must have the
correct file name for the router to boot successfully after a
cold-start. Using the Administration > Boot Router option,
you can specify another software image.
You can rename the bootable image file, but you must use
the new name when you boot the router. See Chapter 4 for
information about booting routers.
afn.exe Bootable image for the AFN
with nonvolatile (flash) file
system
an.exe Bootable image for the AN
and ANH
arn.exe Bootable image for the ARN
asn.exe Bootable image for the ASN
bn.exe Bootable image for the BLN
and BCN
s5000.exe Bootable image for the
System 5000
asndiag.exe Copy of the diagnostics image
for the ASN
You cannot read or change this file.
bcc.help Help file for the Bay
Command Console (BCC™)
You cannot change this file.
config Default configuration file The router references this binary file for configuration data
when booting. You can use another configuration file using
the Boot Router option. You can change the default
config
file by renaming a new, tested configuration file to
config .
The file must be named
config for the router to boot with it
automatically. We recommend that you back up the
config
file under a unique name before overwriting it.
debug.al ASCII file containing aliases Aliases are commands that abbreviate long or multiple
commands. They are used to debug common network
problems.
frediag.exe Copy of the diagnostics image
resident on the diagnostics
PROM for the BCN and BLN
You cannot read or change this file.
(continued)