Technical data

Configuring and Managing Routers with Site Manager
4-4 117347-A Rev. A
If the PCMCIA/Floppy switch is in the PCMCIA setting and you boot the router,
the following occurs:
• The router boots using 1:ace.out if it is available. If not, it boots from
2:ace.out if it is available. If both are unavailable, a boot error occurs.
• The router boots using 1:config if it is available. If not, it boots from 2:config
if it is available. If both are unavailable, a configuration error occurs.
Booting with the Default Configuration and Image Files
To boot the router using the default configuration file (config) and image file, press
the Reset button on the router’s front panel.
You typically perform this type of boot when testing a new configuration file. If
the router does not boot properly, you can press the Reset button to boot the router
using the default config file.