Technical data

Modifying and Saving Router Configurations
117347-A Rev. A 3-29
5.
Configure circuits on the new link or net module.
Refer to “Configuring a Circuit” on page
3-12.
6. Choose File > Save to save your changes.
Refer to “Saving Configuration Files” on page
3-30 for instructions.
7. Reboot the router with the edited configuration file.
Refer to Chapter 4 for instructions.
8. Delete the old configuration file from the router.
Refer to Chapter 4 for instructions.
9. Rename the edited configuration file to config.
Refer to Chapter 4 for instructions.