Technical data

Modifying and Saving Router Configurations
117347-A Rev. A 3-27
Modifying Configurations with New Link or Net Modules
When you replace a link module or net module with a module of a different type,
you must edit the router’s configuration file to reflect this change. When you
change hardware in a slot containing configured circuits, the Configuration
Manager automatically deletes the circuits.
To replace a new link module or net module:
1. Copy the router’s configuration file.
Refer to “Making a Copy of the Existing Configuration File” on page
3-7.
2. In the main Site Manager window, choose Tools > Configuration
Manager > Local File/Remote File/Dynamic.
The Configuration Manager window opens (refer to Figure
3-7).
3. Select the file and click on Open File.
The Configuration Manager displays the router’s connectors.
4. Specify the new module in the Configuration Manager window as
follows:
a. Click on the link or net module from which you deleted the circuits.
The Module List window opens. Figure
3-16 shows the Module List
window for an ASN router.
Note: Only the ASN router uses net modules.