Technical data

Configuring and Managing Routers with Site Manager
3-26 117347-A Rev. A
Deleting a Circuit from the Router
When you delete a circuit from the router, you remove all line and protocol
information from that circuit. If you want to redefine this circuit, you must repeat
the procedure for adding network interfaces.
To delete a circuit from the router:
1. In the Configuration Manager window, choose Circuits > Delete Circuit.
The Circuit List window opens (refer to Figure
3-11).
2. Choose the circuit you want to delete.
3. Click on Delete.
The Delete Circuit window opens (Figure
3-15). The circuit you selected is
displayed in the Delete circuit field.
Figure 3-15. Delete Circuit Window
4.
Click on Delete again.
You return to the Circuit List window.
5. Repeat steps 2 through 4 for each circuit that you want to delete.
6. Click on Done.
You return to the Configuration Manager window.
The Configuration Manager deletes the circuit from the router. This circuit
will no longer appear in the Circuit List window.