Technical data

Modifying and Saving Router Configurations
117347-A Rev. A 3-25
Deleting Protocols from a Circuit
To delete protocols from a circuit:
1. In the Configuration Manager window, choose Circuits > Edit Circuits.
The Circuit List window opens (refer to Figure
3-11).
2. Select the circuit whose configuration you want to modify.
3. Click on Edit.
The Circuit Definition window opens (refer to Figure
3-12).
4. Choose Protocols > Add/Delete.
The Select Protocols window opens (refer to Figure
3-9).
5. Click on the box to the left of each protocol that you want to delete.
6. Click on OK.
You return to the Circuit Definition window (refer to Figure
3-12). The
protocols you just deleted no longer appear in the Protocols list.
7. Repeat steps 4 through 6 to delete other protocols.
8. Choose File > Exit.
You return to the Circuit List window.
9. Click on Done.
You return to the Configuration Manager window.