Technical data

Configuring and Managing Routers with Site Manager
3-20 117347-A Rev. A
3. Click on Edit.
The Circuit Definition window opens (Figure
3-12).
Figure 3-12. Circuit Definition Window
4.
Choose Protocols > Add/Delete.
The Select Protocols window opens (refer to Figure
3-9).
5. Choose the protocols that you want add to this circuit; then click on OK.
For each protocol you add, the Configuration Manager displays a
protocol-specific configuration window.
6. Configure each protocol you are adding.
Refer to the appropriate protocol-specific documentation.You return to the
Circuit Definition window when the protocol configuration is complete.
7. Repeat steps 1 through 6 for each circuit requiring additional protocols.
8. Choose File > Exit.
You return to the Circuit List window.
9. Click on Done.