Technical data

Configuring and Managing Routers with Site Manager

3-18 117347-A Rev. A

• Specify values for WAN conﬁguration parameters, if prompted by the

Conﬁguration Manager.

For some WAN protocols, such as ATM DXI, SMDS, SDLC, and X.25,

you must conﬁgure certain parameters immediately after selecting the

WAN protocol for a circuit. Refer to the appropriate WAN documentation

for instructions on conﬁguring protocol parameters.

After you deﬁne all protocols for the circuit, you return to the Conﬁguration

Manager window. The connector is highlighted to indicate that the interface has

been conﬁgured.

After you add a network interface you can:

• Add more network interfaces (repeat the previous procedures).

• Modify existing network interface (refer to “Modifying Circuits on an

Interface” on page

3-19).

• Save and implement your new conﬁguration ﬁle (refer to “Saving

Conﬁguration Files” on page

3-30).