Specifications

90302292 E3 Event and Alarm Messages
4-7
Device Events and Alarms
CsEvFormat/Event3600011e
{d "%w- %d %m-, %Y - %T"} Two or more
stations with the same MAC address have
been detected on the network. {t} (name -
{m }). (Trap type: 1.3.6.1.4.1.45.2.7.0.6.2) -
(event [{e}]).
CsPCause/Prob36000118
1) Two or more stations on the network
have the same MAC address.
CsEvFormat/Event3600011f
{d "%w- %d %m-, %Y - %T"} The bad FDDI
MAC frames threshold was exceeded for
{0 2}. The frame error condition is {T
T3600011f_FCon 1}. Frame count is {I 3}.
Error count is {I 4}. Lost count is {I 5}. {t}
(name - {m }). (Trap type:
1.3.6.1.4.1.45.2.7.0.6.3) - (event [{e}]).
CsPCause/Prob36000119
1) There may be a problem between this
station and its upstream neighbor. The
upstream neighbor may be transmitting
errors or leaving the ring.
CsEvFormat/Event36000120
{d "%w- %d %m-, %Y - %T"} A station is
experiencing local buffer congestion. {t}
(name - {m }). (Trap type:
1.3.6.1.4.1.45.2.7.0.6.4) - (event [{e}]).
CsPCause/Prob3600011a
1) A station is experiencing local buffer
congestion.
CsEvFormat/Event36000121
{d "%w- %d %m-, %Y - %T"} The link error
monitor has observed a link error rate
cutoff or alarm threshold condition. {t}
(name - {m }). (Trap type:
1.3.6.1.4.1.45.2.7.0.6.5) - (event [{e}]).
CsPCause/Prob36000116
1) There is a connection problem with the
transceiver and/or the wiring connected to
the port.
CsEvFormat/Event36000122
{d "%w- %d %m-, %Y - %T"} An
undesirable or illegal connection attempt
was detected on port {O 2}. The port PC
type is {T T36000117_PCTy 1}. The port
PC neighbor type is {T T36000117_PCTy
3}. The port's connect state is {T
T36000117_PCSt 4}. {t} (name - {m }).
(Trap type: 1.3.6.1.4.1.45.2.7.0.6.6) -
(event [{e}]).
CsPCause/Prob36000117
1) Twisted ring error. 2) Local connection
policy violation.
CsEvFormat/Event36000123
{d "%w- %d %m-, %Y - %T"} A port has
exhibited elasticity buffer errors. {t}
(name - {m }). (Trap type:
1.3.6.1.4.1.45.2.7.0.6.7) - (event [{e}]).
CsPCause/Prob3600011c
1) A station may be transmitting frames
that are too long. 2) A station may be
using a clock that is out of tolerance.
Table 4-1. Events and Alarms