Specifications

Device Events and Alarms
Event and Alarm Messages Bay Networks BayStack Hubs
4-2 Management Module Guide
Table 4-1. Events and Alarms
CsEvFormat/Event01020001
{d "%w- %d %m-, %Y - %T"} A "hot swap"
has been detected in slot {O 2} (slot is
second digit). Operational state is {T
Syn5OpTable 3}. {t} (name - {m }). (Trap
type : 0x01) - (event [{e}])
No Probable cause message.
CsEvFormat/Event01020002
{d "%w- %d %m-, %Y - %T"} The
operational condition of component {O 2}
is {T Syn5OpTable 3}. [component first
digit - (1) Supervisory Module (2)
Backplane (3) Module (4) Power Supply
(5) Temp Sensor (6) Fan (7) Clock ]. {t}
(name - {m }). (Trap type : 0x02) - (event
[{e}])
CsPCause/Prob01020002
1) The component or sub-component listed
in the event file has a problem condition,
either warning, non-fatal, or fatal.
CsEvFormat/Event01020003
{d "%w- %d %m-, %Y - %T"} DCE {O 4} on
ring {I 3} (ring ID {I 1}) whose last NAUN
is {X 5} has detected a beaconing station.
The beacon type is {T S5TRBeaconType
7}. {t} (name - {m}). (Trap type :
0x01020003) - (event [{e}])
CsPCause/Prob01020003
1) The beacon type indicates the reason
for the beacon. If reconfiguration, the ring
will recover. If signal loss, the beaconing
station is no longer receiving a valid
signal. If bit-streaming, the beaconing
station is no longer receiving a valid token
or frame but is receiving a valid signal. If
contention streaming, the station is
indicating that monitor contention could
not be resolved within one second.
CsEvFormat/Event01020004
{d "%w- %d %m-, %Y - %T"} DCE {O 4} has
detected a splitter on ring {I 3} (ring ID {I
1}). {t} (name - {m}). (Trap type : 0x08) -
(event [{e}])
CsPCause/Prob01020004
1) A lobe splitter is interfering with
normal ring operation.
CsEvFormat/Event01020005
{d "%w- %d %m-, %Y - %T"} DCE {O 4} has
detected a new active monitor (MAC
address - {X 7}) on ring {I 1}. The last
Nearest Upstream Neighbor Address
(NAUN) is {X 5}. {t} (name - {m}). (Trap
type : 0x08) - (event [{e}])
No Probable cause message.