Specifications

Ethernet Attachment Configuration View
Configuration Views Bay Networks BayStack Hubs
3-10 Management Module Guide
Write Configuration Settings to NVRAM
Allows you to write the current configuration settings to local non-volatile
random access memory (NVRAM). Table 3-12 lists all valid entries.
Reboot Agent
Allows you to reboot the agent. Table 3-13 lists all valid entries and a
description of each.
Ethernet Attachment Configuration View
Each of the attachments on the module has an Ethernet Attachment
Configuration view. These views provide information on the configuration of
each specific attachment. To access this view:
1. Within the Logical Device view, highlight the Chassis icon.
2. From the View Menu, select Icon Subviews > Attachment
Configuration.
This view provides the following information:
Module
Displays the number specifying the location in the hub of the module having
the attachment.
Attachment
Displays the number specifying the location of the attachment on the module.
Table 3-12. Write Configuration Settings to NVRAM
Value Description
valid contents valid
write write configuration settings to local storage
other some unknown or other state
Table 3-13. Reboot Agent Values
Value Description
other agent in unknown or other state
running agent running
restart restart agent (i.e., jump to beginning of agent code)
reboot start boot sequence for agent (i.e., jump to beginning of boot
firmware)
reset do a hardware reset