Specifications

90302292 E3 Configuration Views
3-7
NMM Agent Configuration View
not available on a Novell network. Table 3-5 lists all valid entries:
Local Storage Version
Displays the version of the agent saved in local storage (such as flash
memory). If not known or not available the value is zero.
Configuration Load Source
Displays the source from which to load configuration information at the next
boot. The values are given in Table 3-6.
When local only is specified, the configuration information is loaded from
local storage. If the local configuration is not valid, then BOOTP is used for
the IP stack.
In IPX only mode, the IP address could be 0.0.0.0; IPX does not rely on the IP
address. The agent checks the IPX address, and if the network number of the
IPX address is equal to 0 the agent uses SAP.
When net only is specified, the configuration information will be
downloaded from the network only. The configuration information will never
be loaded from local storage, even if downloading fails and the local
configuration information exists.
When net with local backup is specified, a download of the configuration
information will be tried over the network. If the network download fails, then
the configuration information will be loaded from local storage.
Current Gateway
Displays the IP address of the current default gateway (router). If not used,
this object has the value of 0.0.0.0.
Table 3-5. Initial Boot Info Source Entries
Value Description
local Don't use the network.
net using bootp Try using the network and if that fails then use protocol
configuration information from local storage.
other Not applicable or some other case.
Table 3-6. Configuration Load Source Values
Value Description
local only get from local storage
net only load from the network
net with local backup try using network and if it fails then use local information
other not applicable or some other case