Specifications

Module Configuration View
Configuration Views Bay Networks BayStack Hubs
3-4 Management Module Guide
which time the part status is changed to enabled. This value is zero if the port
is not timed partitioned or the amount of time is not available.
Link Status
Displays whether the port is receiving link status. The possible values are
detailed in Table 3-2.
Jabber Status
Displays the jabber status of the end node or nodes connected to the port. The
possible values are shown in Table 3-3.
Module Configuration View
This view provides an attachment table as well as information on the
configuration of the module. To access this view:
1. Within the Logical Device view, highlight the NMM icon.
2. From the View Menu select Icon Subviews > Module Configuration.
This view provides the following information:
Module
Displays the number specifying the location of the module in the hub.
Manufacture Date
Displays, in ASCII, the date of manufacture of the module following the
format: yyyymmdd. For example, the value for April 13, 1993 is 19930413. If
the date is not available, a zero is displayed.
Table 3-2. Link Status Values
Value Description
other returned for AUI
off link is not connected, applies to 10BASE-T and Fiber ports
only
on link is connected; applies to 10BASE-T and Fiber ports only
Table 3-3. Jabber Status Values
Value Description
other unknown or other condition
jabbering port is receiving jabber
ok port is not detecting any jabber