Specifications

90302292 E3 Configuration Views
3-3
Port Configuration View
Component Index
Displays the number of the module containing the agent.
Interface Index
Displays the index number of the interface.
IP Address
Displays the IP address of the interface. A value of 0.0.0.0. indicates the IP
address is unknown or unused.
Port Configuration View
This view provides information on the configuration of the selected port. To
access this view:
1. Within the Logical Device view, highlight the Port icon.
2. From the View Menu select Icon Subviews > Port Configuration.
This view provides the following information:
Module
Displays the number specifying the location in the hub of the module the port
is on.
Port
Displays the number uniquely identifying the selected port on the module.
Part Status
Allows you to change the partition status of the selected port. The possible
values are listed in Table 3-1.
Part Time (secs)
Displays the length of time to keep the port partitioned when a timed
partition is done to the port. This value can only be written in the same
request that sets the status of the port to TimedPartition. Afterwards, it
indicates the amount of time left before the timed partition is completed, at
Table 3-1. Partition Status Values
Status Description
other partition status is unknown (Read Only)
enabled port is enabled (Read-Write)
partition port is partitioned (Read-Write)
autopartition port is auto-partitioned by the hardware (Read Only)
timedPartition port is configured for timed partitioning (Read-Write)