Specifications

Chassis Configuration View
Configuration Views Bay Networks BayStack Hubs
3-2 Management Module Guide
Chassis Contact
Allows you to enter or modify the contact information for the person
responsible for the chassis.
Chassis Description
Displays a physical description of the chassis.
Chassis Location
Allows you to modify the description of the physical location of the chassis
(e.g., fourth floor wiring closet).
Total Physical Changes
Displays the total number of physical changes (i.e., the addition or removal of
a component or sub-component) that have been detected in the chassis since
the start of the agent.
Last Physical Change
Displays the value of the sysUpTime variable when the last physical change
(i.e., addition or removal of a module) was detected in the chassis.
Total Attachment Changes
Displays the total number of attachment changes across all modules in the
chassis that have been detected since the start of the agent.
Last Attachment Change
Displays the value of the sysUpTime variable when the last attachment
change on any module in the chassis was detected.
Total Configuration Changes
Displays the total number of configuration changes (other than attachment
changes, physical additions or removals) across all modules in the chassis that
have been detected since the start of the agent.
Last Configuration Change
Displays the value of the sysUpTime variable when the last configuration
change (other than attachment changes or physical additions or removals) on
any module in the chassis was detected.
Accesses the Agent Interface View, described on page 3-2.
Agent Interface View
This view contains the Agent IF Table, which provides information about each
interface for each agent in the chassis. The number of entries in the table is
determined by the number of agents in the chassis. The Agent IF Table
provides the following configurable information:
Agent Interface