Specifications

Chassis Icon
NMM Icon Subviews Menu
Device Views Bay Networks BayStack Hubs
2-18 Management Module Guide
Next Boot IP Addr
Displays the IP address of the interface that will be used for the next boot. If
no IP address is used, then the value is 0.0.0.0. is displayed. The current IP
address for the interface is found in the IP Address Table.
Next Boot Net Mask
Displays the subnet mask for the interface that will be used for the next boot.
If no subnet mask is used, then the value is 0.0.0.0. is displayed. The current
subnet mask for the interface is found in the IP Address Table.
Load Server Addr
Displays the IP address of the load server for the configuration file and/or the
image file. If the IP address is not used, then the value is 0.0.0.0. is displayed.
Valid Flag
Indicates if the configuration and/or image file(s) were downloaded from this
interface and if the file names have not been changed. Table 2-15 provides a
list of possible values.
Config File Name
Displays the name of the configuration file currently associated with the
interface. When not used, the value is zero.
Image File Name
Displays the name of the image file(s) currently associated with the interface.
Some agents in special situations may support a value which contains
multiple file names instead of a single file name. Multiple names are specified
as a list of file names separated by semicolons (;). When this object is not used,
the value is zero.
Write Configuration Settings to NVRAM
Allows you to write the configuration settings to non-volatile random access
memory (NVRAM). This causes the current configuration settings to be
written to local non-volatile storage. Table 2-16 provides a list of possible
values.
Table 2-15. Valid Flag Status Values
Value Description
valid Configuration and/or image file(s) downloaded from this interface
are currently in use.
invalid Configuration and/or image files downloaded from this interface
are not in use (this may also mean that there are no files
downloaded from this interface).