Specifications

Chassis Icon
Ethernet Port Redundancy View
Device Views Bay Networks BayStack Hubs
2-14 Management Module Guide
Switchover Time
Displays the amount of time before a switchover completes between the port
and its companion.
Redundancy Mode
Displays the redundancy mode of the port. Possible values are listed in
Table 2-10.
Values that can be written to the device to change redundancy mode are listed
in Table 2-11.
Table 2-9. Redundant Capability Values
Value Description
hwRedOnly hardware redundancy only
swRedOnly software redundancy only
hwAndswRed both hardware and software redundancy
Table 2-10. Redundancy Mode Values
Value Description
standalone The port is not in any redundant pair.
hwActive The port is the active companion in a hardware-redundant
pair.
hwStandby The port is the standby companion in a hardware-
redundant pair.
swActive The port is the active companion in a software-redundant
pair.
swStandy The port is the standby companion in a software-redundant
pair.
Table 2-11. Values That Change Redundancy Mode
Value Description
standalone Causes the redundant pair to be broken up.
hwActive If the previous value was hwStandby, this value causes the
port to become the active port in the hardware-redundant
pair, resulting in a switchover.
hwStandby If the previous value was hwActive, the port becomes the
standby port in the hardware-redundant pair, resulting in a
switchover.