Specifications

90302292 E3 Device Views
2-13
Chassis Icon
Ethernet Port Redundancy View
companion even if it is in standalone mode. This allows you to determine the
location of the potential redundant companion as it is fixed by the module’s
hardware.
Companion Port
Identifies the redundant port number. If this port is hardware-redundancy
capable, this field displays the slot number of the potential redundant
companion even if it is in standalone mode. This allows you to determine the
location of the potential redundant companion as fixed by the module’s
hardware.
Operational Status
Displays the redundancy status of the port. Possible values are listed in
Table 2-7.
If the redundant link consists of ports without remote fault capability, the
value remoteFault is not reported and the value localFault implies that
the link is off.
Switchover Status
Indicates whether a port has redundancy capabilities. The possible values are
given in Table 2-8.
Capability
Indicates the redundant-capability of the port. Possible values are described
in Table 2-9.
Table 2-7. Operational Status Values
Value Description
other Does not belong top a redundant pair.
ok No faults detected.
localFault The local port has sensed a fault condition. This value will
cause a switchover.
remoteFault The remote port has sensed a fault condition. This value
will cause a switchover.
Table 2-8. Switchover Status Values
Value Description
other An unknown or other state.
timedSwitchover The port is active and another port is in standby. if the
active port fails a timed switchover between the two ports
occurs.