Specifications

90302292 E3 Device Views
2-5
Module Icons
ENET Media Icon Subviews Menu
BayStack Ethernet Chassis Redundancy Table View
This view provides redundancy status and control for each redundancy-
capable port in the BayStack chassis. Only the following types of redundancy-
capable ports appear in the table:
• Ports with remote fault signaling capability
• Ports without remote fault signaling capability which depend on link
status to provide redundancy
The Redundancy Table provides the following information:
Last Change
Displays the “sysUpTime” value when the last change to any Redundancy
Table entry was detected.
Module
Displays the slot in the chassis containing the module on which the port is
located.
Port
Displays the number of the port on the module.
Capability
Displays the redundant-capability of the port. Possible values are described in
Table 2-1.
Redundancy Mode
Displays the redundancy mode of the port. Possible values are listed in
Table 2-2.
Table 2-1. Redundant-capability Values
Value Description
hwRedOnly hardware redundancy only
swRedOnly software redundancy only
hwAndswRed both hardware and software redundancy
Table 2-2. Redundancy Mode Values
Value Description
standalone The port is not in any redundant pair.
hwActive The port is the active companion in a hardware-redundant pair.
hwStandby The port is the standby companion in a hardware-redundant pair.
swActive The port is the active companion in a software-redundant pair.
swStandy The port is the standby companion in a software-redundant pair.