Technical data

Installing the BayStack 350 Switch
893-00992-D
2-7
Installing on a Table or Shelf
To install the BayStack 350 switch on a table or shelf, follow these steps:
1.
Attach a rubber footpad to each corner on the bottom of the switch
(Figure 2-3
).
2.
Position the switch on the table or shelf, with the front panel facing you.
Be sure to leave adequate space around the unit for ventilation and access
to the cables.
3.
If you are securing the switch to a table or shelf, insert two screws (not
supplied) through each of the mounting brackets, then tighten the screws.
4.
Proceed to “Connecting Port Cables” on page 2-13 to connect the
network cables.
Figure 2-3. Attaching rubber footpads
586FA
310T