Technical data

Using the BayStack 350 Series 10/100 Autosense Switch
1-34
893-00992-D
Figure 1-23. Trunk Configuration screen for switch SW2
The Inter-Switch Trunk Configuration screen for switch SW2 is configured as
follows:
• Trunk field (read only) --- indicates the trunks (I1 and I2 for this switch) that
corresponds to the switch ports specified in the Trunk Members fields.
• Trunk Members fields --- indicates the ports that can be configured, in each
row, to create the corresponding trunk:
– Ports 25 and 26 are assigned as trunk members of trunk I1.
– Ports 1 and 2 are assigned as trunk members of trunk I2.
• STP field --- indicates the spanning tree participation setting for each of the
trunks:
– Trunk I1 and I2 --- indicates that trunks I1 and I2 are enabled for
spanning tree participation.
Inter-Switch Trunk Configuration
Trunk Trunk Members STP Trunk Mode Trunk Status
----- ---------------------------- ------------ --------------- ------------
I1 [ 25 ][ 26 ][ ][ ] [ Enabled ] [ Enhanced ] [ Enabled ]
I2 [ 1 ][ 2 ][ ][ ] [ Enabled ] [ Enhanced ] [ Enabled ]
I3 [ ][ ] [ Enabled ] [ Enhanced ] [ Disabled ]
I4 [ ][ ] [ Enabled ] [ Enhanced ] [ Disabled ]
Valid inter-switch trunk configurations are:
1 or 2 trunks of up to 4 links each
Up to 4 trunks of 2 links each
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.